KITSLATE

Media Center

File transfer for large video and camera files

Send up to 1 TB by email or link. Your client needs no account and nothing to install.

Drop your files here
or a folder. Up to 5 GB on the free profile, 500 GB on Solo, 1 TB on Studio and above per transfer. Email the link, or copy it and share it anywhere.
Choose files
Sending takes a free KitSlate account. Recipients never need one.Drop or choose files, sign in or create one (no card), and your Send page opens with them already picked.

29.8 GB of camera files went up in 1 min 47 sec on a real send. A camera file plays on their page about 2½ min after it arrives.

Transfer and preview speed

How we measured it

Measured on a real send
29.8 GBcamera files
1 min 47 secto upload
2.23 Gbpsup
2.04 Gbpsdown
How long at that speed
19 sec5 GB
6 min100 GB
32 min500 GB
1 h 6 min1 TB

Measured on a real send from our office in Manhattan, on a 2 Gbps fiber connection: 29.8 GB of camera files up in 1 min 47 sec at 2.23 Gbps (278 MB/s) over 14 connections, read from the laptop’s own drive, and 2.04 Gbps back down. From an external RAID the same line went up at 1.57 Gbps: the drive was the limit, not the upload. On a 200 Mbps line, 100 GB takes about 1 h 12 min.

Preview speed, with others sending at the same time
2½ min1 sender
2 min 40 sec5 senders
4½ min20 senders
0never played

9 in 10 clips playable within the time shown, from upload done to playing. One camera file plays on their page in 2½ min. A 2.07 GB Sony FX6 MXF: first view at 89 sec, full quality at 146 sec. KitSlate’s test system, October 2026: 32 preview machines. KitSlate runs 320.

Test your line
Upload
Not yetyour internet
Download
Not yetyour internet
Measure this computer’s line. On your Send page the test also measures the route to KitSlate storage.
The Media Center

Your client plays it on the page.

Camera files play on the link, MXF and ProRes included. They comment at the frame and take just the part they need.

Up to 1 TB per transfer5 GB free. Folders stay as they were.
The link works at onceShare it while the files are still going up.
No account to watchThey open the link. Nothing to install.
The Media Center in the app while a camera’s files upload: the transfer’s link with Copy link beside it, the files that are done, sending and waiting, and how long is left The page a client opens for a day shot on three cameras, as tiles: the Cameras list at the left with each camera’s clips, a tile per clip with its picture, length, camera and size, and at the right the conversation, its notes at timecodes, and Download everything The page a client opens for a day shot on three cameras, as tiles: the Cameras list at the left with each camera’s clips, a tile per clip with its picture, length, camera and size, and at the right the conversation, its notes at timecodes, and Download everything The player window on a four-track clip with Meters on: a lane per track under the picture with its waveform, and the Audio tab with the level meters, each track’s meter and speaker, the fourth Silent, and Stereo, Mono, Left, Right and Reverse The player window with Trim open under the picture: the filmstrip with yellow handles round the chosen part, Set in, Set out and Play selection, the part’s in, out and duration in timecode, Attach range to a comment and Download this part The player window paused at 0:03, a note’s marker at 0:06 on the scrubber, the transcript under the picture, and Comments beside it: each note with its clip, its time from the start and its timecode, Copy TC and the sender’s replies The page’s Transcripts list: each clip’s transcript under its name with its number of lines, every line led by the clip’s own timecode, the cameras at the left and the comments at the right Take 01 in Three across: the A, B and C cameras side by side, each with its name and running timecode, the live one outlined, the bar with Trim, Meters and Transcript, when each one was recording with the recorder’s four tracks under it, and the transcript below, every line at the take’s timecode and the line being heard lit

Drag the picture sideways to read it.

Send · The link and Copy link, while the files are still going up.

A password or a codeLock the link, or email them a code first.
Clean speechTurn the room down so the voice comes through.
You see what they seeTheir page, plus who opened, played and downloaded.
KitSlate Desktop

The same Media Center, as an app.

For Mac and Windows. Big uploads keep going through sleep, a closed window and a restart.

Walk awayIt carries on through sleep and a restart.
Reads your diskMany parts at once, straight to storage.
Every part checkedA file is done only when it matches.
KitSlate Desktop on a Mac, light mode: the sidebar with Send, Sent, the Local Media Player, three projects, two received transfers and the cards under On this computer; in the middle five clips from one camera as a table with their type, size and length, the proxy, preview and transcript choices and a finished speed test; on the right Sam Ortiz as the recipient, the subject, Fernway (Demo) as the sender, the contact, a short note and Send at the foot. KitSlate Desktop uploading a whole card, 18 clips from three cameras and the sound roll: 40 percent sent, about 5 minutes left, Watch as it arrives with a picture of every clip, four ready to play, two uploading and the rest waiting, and on the right their link with Copy link and every file with its own progress. A transfer page opened in KitSlate Desktop: Coast trip, day 3, its first clip, a kangaroo on a beach at first light, playing in the middle with its bar, four notes at timecodes in the conversation at the right, and Download everything, saving into ~/Downloads. KitSlate Desktop on a Mac, light mode: the Local Media Player on a take of three cameras at Sydney Harbour at sunset, the wide shot of the bridge at the top beside the medium and close cameras, its bar, when each camera was recording under it, the presenter's lines transcribed on this computer below, and five selects with their timecodes in the panel at the right.

Drag the picture sideways to read it.

Send · A camera’s files in the app, with who it is for and the note.

One folder, no accountBig deliveries arrive whole, and finish.
Transcripts on your computerMade with nothing sent. Unlimited, every plan.
Updates itselfThe pages are the live site.

How it works

Every Media Center feature, in full
Send big

Up to 1 TB, and the link works right away.

Drop a camera card, a folder or one file: 5 GB on the free profile, 500 GB on Solo, 1 TB on Studio and above. Email it to the people on the job, or copy one link and share it anywhere.

The link exists the moment the upload starts, so you can paste it while the files are still on their way. Their page shows what has arrived and fills in the rest as it comes.

While it uploads, each clip plays on the uploading screen the moment it’s up, in the same player your client gets. A long upload is never stopped by the sign-in, and if the tab is closed, Resume in Chrome or Edge reopens the same files with one Allow. There is nothing to pick again.

Choose what they get: the Media page, to play, comment and read the transcript, or Download only, one page with the link and the files. Switch it any time from Sent.

KitSlate’s Media Center in the app: Media Center selected in the sidebar, the Send, Sent and Settings tabs, and three cameras’ files uploading with the link and Copy link already showing, 40 percent up, a picture of every clip under Watch as it arrives, four ready to play, and every file listed as sending, done and waiting
Watch as it arrives, under the upload: eight clips as picture tiles, four Ready to play, two Uploading and two Waiting, and Open your page
Play anything

Camera files play on the page. MXF and ProRes too.

A browser can’t play MXF, ProRes or DNxHR, so KitSlate makes a preview from the camera file and the page plays that. When the camera recorded a proxy, the proxy plays at once. The download is always the untouched master.

With no camera proxy, the preview is made in two-minute pieces side by side: a 33-minute 4K take of 25 GB played 9¾ minutes after it arrived.

With light previews on, a camera proxy also gets a KitSlate copy that steps down on a slow connection: a 33-minute proxy had one 3½ minutes after it arrived.

Under the picture, a spec sheet read from the file itself: Picture, Sound and Source, down to the start timecode and the camera.

The client’s page playing a camera clip from its proxy: the clips on the left, the picture with the time and the camera timecode, the bar, the transcript under it with the line being heard lit, and the comments on the right
The Specs tab beside the player: Picture (XAVC-I, 3840×2160, 23.976 fps), Camera (S-Log3, S-Gamut3.Cine), Sound (four channels named Boom, Lav 1, Lav 2 and Camera mic) and Source (length, start timecode 01:00:12:00, camera FX6 and the master’s size)
Every audio track

Hear every track the camera recorded.

Each track gets its own lane with a switch, a solo button and a slim meter with peak hold and loudness. One Audio menu, like VLC’s, picks the tracks and how they reach your ears: Stereo, Mono, Left, Right or Reverse.

A sound recorder’s poly WAV shows the mixer’s track names, and downloads whole, as one track, or split into a mono WAV per track.

An eight-track camera clip in the expanded player: a waveform lane for each of the eight tracks under the picture, the Audio panel with each track’s meter, and the Audio channels menu open with a checkbox per track, All and Only 1 to 4, and Stereo, Mono, Left, Right and Reverse
A sound recorder’s poly WAV playing: six lanes named from the mixer (Boom, Lav 1 Host, Lav 2 Guest, Plant, Mix L and Mix R), each with a switch and a solo button, and its transcript under them
Trim and take originals

Take just the part they need.

Set an in and an out on the filmstrip and download that part. A WAV, MP4 or MOV comes out in its original quality, the frames untouched; a long-GOP clip starts on the keyframe at or before the in point. Any file with a preview also gives a compressed MP4 of the part, small enough to message.

Trim open under the player: Set in, Set out and Play selection, the handles row, the filmstrip with the yellow handles round the part, and its in, out and duration in timecode with Attach range to a comment and Download this part
Download this part opens the export window: the player expanded with Trim open under it, and at the right the three steps on the first, What to make, with the camera proxy’s own frames marked Original and a compressed MP4 marked Compressed, the quality lines and Next · Export
Comment at the frame

Notes at the exact frame.

Pause anywhere and write. The note carries the clip’s own timecode and opens the clip at that frame for you; you answer on the same thread, and they see it on their page.

Each note sits as a marker on the scrubber, and Copy TC puts its timecode on the clipboard for the edit.

Comments beside the player: a note at 0:04 and a note on the part 0:06 to 0:09, each with its camera timecode and Copy TC, both marked on the scrubber under the picture, and the transcript under the bar
The conversation beside the player: each note carries a chip with the clip, the moment and its timecode, a Copy TC button beside it, and the sender’s reply in the same thread
Transcripts

Read what was said, at the timecode.

A transcript of each clip, every line with the clip’s own timecode. A 25-minute recording took 48 seconds, its first lines on screen while the rest were still being heard. The words light up as it plays; press a line to go there, search it, and select a few words to trim to exactly that part.

Highlight the words you want and they turn yellow. Press Add to selects and each one keeps its clip, its timecode in and out and its words, in the order you set. Or press Ask for selects and your client does it on their page: they highlight the sound bites and send them back to you in one message.

Take them into the edit as an EDL, every bite cut from its original file, back to back, or copy them as text. The transcript itself downloads as text or as SRT or VTT subtitles, and it’s made automatically, so check it before you quote it.

The transcript under the player: a search box, every line with the clip’s own timecode and the line at the playhead lit, then Copy or download and Paper edit
A sound bite highlighted yellow in the transcript under the player, and over it the bar for it: its timecode in and out, the handles, Add to selects, Download this part, Attach to a comment and Copy text
The Selects under the player: two sound bites, each with its clip, timecode in and out, its words, Play this select and Trim this part, then Download EDL and Copy as text
Clean speech

Hear the words, not the room.

Press Clean speech in the Audio panel, pick a strength (Light, Medium or Strong) and hear a minute from where you are before anything else is made. Room tone, hiss and hum come out of the speech; the voice stays. It runs on KitSlate’s own servers, so there is nothing to install and no per-minute fee.

Clean the whole clip and the page plays it that way for you; As recorded puts the file’s own sound back. Download the cleaned sound, one file per track, to take into the edit. The transcript is never made from it. Cleaning is for listening and export.

The Clean speech pop-up: Light, Medium and Strong with Hear this part beside them, Play this part and the file’s timeline with the window to hear, a switch per track reading cleaned or as recorded here and in the download, the Strength slider and Post filter, Reach, the post filter’s strength, the sample length and Compare, then As recorded, Download with cleaned sound, Clean the whole clip and Done
Multi-camera, in sync

Every camera of a take, in sync. By timecode, by sound or by the clap.

Cameras and the sound recorder become takes: by their timecode when they were jammed, by listening to their sound when they weren’t, or by marking the slate clap clip by clip. Every camera plays together with the recorder’s tracks under them: one big, two or three across, or four at once, and full screen.

Download Take saves the originals in the take’s own folders with an FCPXML for Final Cut Pro and DaVinci Resolve and an XML for Premiere Pro, so the multicam opens already lined up.

Of the transfer services on our comparison page, KitSlate is the only one that syncs takes on the link itself.

Take 01 in Three across: the A, B and C cameras side by side, each with its name and running timecode, the live one outlined, the bar with Trim, Meters and Transcript, when each one was recording with the recorder’s four tracks under it, and the transcript below, every line at the take’s timecode and the line being heard lit
Three ways to watch

On the page, expanded, or full screen.

The page keeps the files, the player and the conversation side by side. Expanded fills the window and puts the audio rail, the clips and the file’s info beside the picture, each one switchable. Full screen is the picture alone, the controls out of the way until you move.

Frame step, an A-B loop, snapshots and J/K/L work in all three. Press ? for every shortcut.

The page view: the transfer’s files on the left, the player with the picture and its transcript in the middle, the comments on the right
On the page
The expanded view: the picture filling the window, the bar under it and the Audio panel beside it
Expanded
Full screen: the picture alone with the controls under it
Full screen
You see what they see

Their page, plus who did what.

Open a transfer you sent and you get the page your client gets: the same player, the same tracks, the same spec sheet. Beside it, an Activity panel only you see: every open, play and download, with the time.

Their messages and yours read as one conversation, on the page for them and under the transfer for you.

The sender’s view of a sent transfer’s page: the Sender view line, the clips as tiles with their pictures, the comments with the recipient’s note and the sender’s reply, and Download everything
Activity, which only the sender sees: who downloaded, wrote, played and opened the page and the email, each with its time, then the upload speed, retries, emails, opens and downloads, and the people the transfer went to
Large file transfer for video, with nothing for the recipient to install

Rushes, grades, deliverables, up to 1 TB per transfer. Drop the folder, add the recipients, and KitSlate emails each one their own download link or gives you a transfer link to share. Recipients need no account and nothing to install: they open the link, play the clips in the browser, and download into a folder they pick, with a download that resumes if the connection drops.

KitSlate reads each clip’s codec, frame size, frame rate, source timecode and length from the file itself, so a producer can see what arrived before anything is downloaded. A speed test before you send measures your line and your connection to storage, so you know how long it will take.

How it sends

Straight into storage. Your browser uploads each part of the file straight into our storage on a signed address, with nothing in between to slow it down. Parts go up over as many as 32 parallel connections, so one slow stream never sets the pace, and the count steps up while it keeps helping. If storage cannot be reached directly from where you are, the upload goes through KitSlate instead and still arrives.

Measured, not promised. Before you start, the speed test measures your line and the route to storage and sets the part size and the connection count. If the connection drops, the upload resumes from the last part that was saved. Recipients stream or download from our network, from the location nearest them. From our office in Manhattan on a 2 Gbps fiber connection: 1.82 Gbps up to storage over 12 connections, 2.04 Gbps back down.

Who can open it

A password, a code to their email, or only the people you sent it to. Every link starts open to whoever has it. On the Send page you can ask that whoever opens it confirms an email address first. We send them a six-digit code, and every visit and download is then recorded against that address. Or you can ask that only the people you sent it to can open it, each confirming theirs. On top of either, a password: 8 to 64 characters, on every plan, which you give them yourself. It is never in the email, and right after you send it is shown to you once, with Copy and Text it.

The code email. The six digits lead the subject, so a phone’s own Copy-code chip finds them. It says which browser asked and roughly where from, so someone who did not ask can tell. Open it, code filled in opens the page with the code entered. It works only in the browser that asked, for 10 minutes; forwarded, it opens nothing. If the link also has a password, the password comes first and the code follows by itself. Before the page opens, the reader sees one box that asks for exactly these things, with your email and phone on it if they get stuck. You can change any of it after sending, from Sent.

The code email as sent: KitSlate, Your code for Day 2 rushes, 6 files · 48.2 GB, the six digits large, Enter it on the download page for Day 2 rushes, from Fernway. It works for 10 minutes, for sam@northlight.example only. Two buttons, Open it, code filled in and Open the download page; then Asked from Chrome on Mac, Near Brooklyn, New York, US, and If you didn’t ask for a code, ignore this email. Nothing opens without it.
The code email, as it arrives. Six digits in the subject and large in the body; who asked and from where; one button that opens the page with the code already in.
On your Mac or PC

Sending from the app. KitSlate Desktop is a small app for Mac and Windows. It opens the same Media Center you use online, signed in as you, and reads your files from disk and sends them in parts, many at once, by the route your browser uses. The difference is what happens when you walk away: it keeps going through sleep, a closed window and a restart. Close the window and it carries on from the menu bar on a Mac or the tray on Windows; a 1 TB shoot finishes on its own.

Receiving with the app. Nothing to install for a recipient who wants nothing installed; for the big ones, their download page offers Open in KitSlate. The app saves every file of the transfer into one folder, in the sender’s own folders, over several connections at once, and if the connection drops or the computer restarts it carries on from the pieces already saved. No account, ever.

Transfer limits by plan

PlanPer transferStorage
Profile · free5 GB25 GB
Solo500 GB500 GB
Studio1 TB1 TB
Production House1 TB4 TB
Enterprise1 TB10 TB

Up to 500 files per transfer. A link lasts 1 to 30 days on a paid plan, 7 by default, and up to 3 on the free profile. On Studio and above it can also never expire. Files are deleted when the transfer expires, or 3 days after you stop sharing it (30 on a paid plan), and can be restored until then. On the free profile, when the 25 GB is full the oldest live transfer ends to make room for the new one. Included in every plan, with no charge per gigabyte.

Free and Pro review tools

Every paid KitSlate plan includes them — for you, and for the people you send to.

Free
  • Send up to 5 GB per transfer25 GB of storage
  • Play and reviewPlay, scrub, volume, speed, full screen and expanded view
  • Comments at a timecodeComment at a moment, copy its timecode, markers on the scrubber
  • The spec sheetPicture, sound and source, read from the file itself
  • Listen as stereo or monoAnd a sound file’s waveform as one combined lane
  • Download the whole fileThe original, exactly as it was sent — or send a Download only page with just the files
Start free
Pro review tools · from Solo, $19/month
  • Trim and original partsPick in and out like Apple Photos — original frames where the file allows, a quick MP4 where it doesn’t
  • Every audio trackA lane, a meter and solo for every track; one-track and split WAV downloads
  • Frame-accurate reviewFrame step, A-B loop, snapshots, timecode display, picture tools, zoom and guides
  • TranscriptsWhat’s said, every line at its timecode — words light up as it plays; search it, trim by selecting text, download TXT, SRT or VTT
  • Ask for selectsYour client highlights the sound bites in the transcript and sends them back — each clip with its timecode in and out — ready for the edit as an EDL
  • Multi-cameraEvery camera of a take in sync — synced by timecode, sound or the clap — with a timeline of when each was recording
  • Much bigger transfers500 GB per transfer on Solo · 1 TB on Studio (5 GB on the free plan)
  • Send as your companyIts name, email and phone on every email and download page
See plans

No monthly cap. Send as often as you like, on every plan. A plan sets how big one transfer can be and how much you keep live at once. Every paid plan is open to anyone today. The production suite joins your sidebar once you’re in, switched off until you want it: quotes, call sheets, crew and invoices, with your transfers attached to each job.

Questions

Do recipients need an account?No. They open the transfer link, play or download, and can write back from the page. By downloading they accept the terms.
Where are transfers stored?On our storage in North America, until the transfer expires. Expired transfers are deleted and are not part of our backups, so keep your own copy.
Can I send from either of my companies?Yes. Sending as picks the company; the email, the page and the contact card carry that company’s name and details.
What does it cost?It is part of the plan: 5 GB on the free profile, 500 GB on Solo, 1 TB on Studio and above per transfer. There is no charge per transfer or per gigabyte.
About the Media Center · Privacy · Terms · Your Privacy Choices
PREVIEW — NOT THE LIVE SITE